|
- 品牌：KAYSEN
- 貨號：KS5987565
- 發布日期： 2019-10-11
- 更新日期： 2025-09-23
| 外型尺寸 | |
| 品牌 | KAYSEN |
| 貨號 | KS5987565 |
| 用途 | 化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
| 是否進口 |
進口不銹鋼電動隔膜泵德國KAYSEN進口電動隔膜泵
GERMANY KAYSEN PUMP CO .,LTD
不銹鋼電動隔膜泵是一種新型的泵類，近年來、由于在隔膜材質上取得了突破性的進展，國際上越來越多的工業化國家采用此種型式的泵，取代部份離心泵、螺桿泵來應用于石化、陶瓷、冶金等行業。
主要特點：
●不需灌引水，自吸能力達7米以上
●通過性能好，直徑在10毫米以下的顆粒、泥漿等均可以毫不費力地通過
●由于隔膜將被輸送介質和傳動機械件分開，所以介質*不會向外泄漏。且泵本身無軸封，使用壽命大大延長。根據不同介質，隔膜分為氯丁橡膠、氟橡膠、丁晴橡膠等，完全可以滿足不同用戶的要求
●體積小重量輕：由于采用了行星擺線傳動結構，故使泵型獲得小尺寸如與同類型泵來比較，其體積重量均下降一半左右
●泵體介質流經部份，可根據用戶要求，分為鑄鐵、不銹鋼、襯膠、電機分為普通式和防爆式(B3d)兩種，目前該泵正應用在下列場合
主要優點：
●結構緊湊、體積小、重量輕、裝拆方便
●傳動效率高
●運轉平穩、噪音低
●使用壽命長
●可無泄漏輸送介質
●可承受空載運行
●不需灌引水，能自通過性能好，大顆粒雜質、泥漿等均可毫不費力地通過
●根據不同介質，隔膜分為氯丁橡膠、氟橡膠、*橡膠、四氟乙烯，完全可以滿足不同用戶的需要。過流部件也可根據用戶要求，分為鐵、不銹鋼、鋁合金，電機分為普通型和防爆型
主要應用：
●各種劇毒、易燃、易揮發液體。
●各種瓷器釉漿水泥灌漿灰漿泥漿。
●各種強酸、強堿、強腐蝕液體。
●各種橡膠漿乳膠、有機溶劑、填料。
●可輸送較高溫度的介質150℃。
●用泵為油輪駁船清倉吸取倉內污水及剩為作各種壓濾機前級送壓裝置。
●熱水回收及循環。
●啤酒花及發酵粉稀漿、糖漿、糖密。
●油罐車、油庫、油品裝卸。
●泵吸礦井、坑道、隧道、下水道中
●泵吸泡菜、果醬、土豆泥、巧克力等。 污水、沉淀物。
●泵吸油漆、樹膠、顏料粘合劑。
●各種特殊介質的吸送。
Stainless steel electric diaphragm pump is a new type of pump. In recent years, due to the breakthrough in diaphragm material, more and more industrialized countries in the world use this type of pump to replace some centrifugal pumps and screw pumps. Used in petrochemical, ceramic, metallurgical and other industries.
main feature:
● No need to irrigate water, self-priming capacity of more than 7 meters
●With good performance, particles, mud, etc. with diameters below 10 mm can pass without difficulty
● Since the diaphragm will be separated by the conveying medium and the transmission mechanism, the medium will never leak out. Moreover, the pump itself has no shaft seal and the service life is greatly extended. According to different media, the diaphragm is divided into neoprene, fluororubber, nitrile rubber, etc., which can fully meet the requirements of different users.
●Small size and light weight: Due to the planetary cycloidal transmission structure, the pump type can be obtained in a small size, such as compared with the same type of pump, its volume and weight are reduced by about half.
●The pump medium flows through the part, which can be divided into cast iron, stainless steel, rubber lined, motor divided into ordinary type and explosion-proof type (B3d) according to user requirements. At present, the pump is being used in the following occasions.
The main advantage:
●Compact structure, small size, light weight, convenient assembly and disassembly
●High transmission efficiency
● Smooth operation and low noise
●Long service life
●No leakage transport medium
● can withstand no-load operation
●It does not need to be irrigated, it can pass the performance well, and the large particles of impurities, mud, etc. can pass without any effort.
● According to different media, the separator is divided into neoprene, fluororubber, nitrile rubber and tetrafluoroethylene, which can meet the needs of different users. The flow-through parts can also be divided into iron, stainless steel and aluminum alloy according to user requirements. The motor is divided into normal type and explosion-proof type.
main application:
● A variety of highly toxic, flammable, volatile liquids.
●All kinds of porcelain glaze cement grouting mortar.
● A variety of strong acids, strong alkalis, strong corrosive liquids.
●All kinds of rubber latex, organic solvent and filler.
● It can transport 150°C medium with higher temperature.
● Use the pump to clear the tanker for the oil tanker and take the pre-stage pressure supply device for various filter presses.
● Hot water recovery and recycling.
● Hops and baking powder slurry, syrup, sugar dense.
● Tank truck, oil depot, oil loading and unloading.
● pumping mines, tunnels, tunnels, sewers
● Pump soak pickles, jams, mashed potatoes, chocolate, etc. Sewage, sediment.
● Pump paint, gum, pigment binder.
● Suction of various special media.
Stainless steel electric diaphragm pump
Fluoroplastic electric diaphragm pump
Miniature electric diaphragm pump
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是 *的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
進口不銹鋼電動隔膜泵德國KAYSEN進口電動隔膜泵
