|
| 外型尺寸 | |
| 品牌 | KAYSEN |
| 貨號 | KS561059 |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
| 是否進口 |
進口槳式攪拌機 德國KAYSEN攪拌機
GERMANY KAYSEN PUMP CO .,LTD
進口槳式攪拌機結構 ，葉片用扁鋼制成，焊接或用螺栓固定在輪轂上，葉片數是2、3或4片，葉片形式可分為平直葉和折葉氏兩種，即根據葉片的形狀特點不同可分為平槳式攪拌器和斜槳式攪拌器。平槳式攪拌器產生的是徑向力，斜槳式攪拌器產生的是軸向力，槳式攪拌器適用于低黏度的液體，懸浮液及溶解液攪拌。
主要特點：
●漿式攪拌機是目前國內外先進、理想的機型，具有自動化程度高、攪拌質量好、效率高、能耗低、噪音小、操作方便、卸料速度快、襯板及葉片使用壽命長，維修保養方便等優點。
●漿式攪拌機適用于塑性、干硬性、輕骨料混凝土及各種灰漿、砂漿的攪拌。
●攪拌桿和攪拌漿葉有不銹鋼、碳鋼防腐和塑料等多種材質；
●容易分解安裝，最少零件個數以及簡單的潤滑，使擺線輪減速機深受用戶的信賴。
●可以在要求的混合時間內達到一定的攪拌強度，滿足混合速度快、均勻、充分等要求，而且水頭損失小，并可適應水量的變化，適用于各種水量的水廠。
主要應用：
進口漿式攪拌機適用于塑性、石灰漿、干硬性、輕骨料混凝土及各種灰漿、砂漿的攪拌。
槳式攪拌機使用注意事項:
●攪拌機應設置在平坦的位置，用方木墊起前后輪軸，使輪胎擱高架空，以免在開動時發生走動。
●攪拌機應實施二級漏電保護，上班前電源接通后，必須仔細檢查，經空車試轉認為合格，方可使用。試運轉時應檢驗拌筒轉速是否合適，一般情況下，空車速度比重車(裝料后)稍快2~3轉，如相差較多，應調整動輪與傳動輪的比例。
●拌筒的旋轉方向應符合箭頭指示方向，如不符實，應更正電機接線。
●檢查傳動離合器和制動器是否靈活可靠，鋼絲繩有無損壞，軌道滑輪是否良好，周圍有無障礙及各部位的潤滑情況等。
●開機后，經常注意攪拌機各部件的運轉是否正常。停機時，經常檢查攪拌機葉片是否打彎，螺絲有否打落或松動。
●當混凝土攪拌完畢或預計停歇1h以上，除將余料出凈外，應用石子和清水倒入抖筒內，開機轉動，把粘在料筒上的砂漿沖洗干凈后全部卸出。料筒內不得有積水，以免料筒和葉片生銹。同時還應清理攪拌筒外積灰，使機械保持清潔完好。
●下班后及停機不用時，應拉閘斷電，并鎖好開關箱，以確保安全。
Hyperbolic mixer
Frame mixer
Paddle mixer
The paddle mixer has the simplest structure. The blades are made of flat steel, welded or bolted to the hub. The number of blades is 2, 3 or 4 pieces. The blade form can be divided into two types: straight leaf and folded leaf. The shape characteristics of the blades can be divided into a flat paddle agitator and a pitch paddle agitator. The flat paddle agitator produces a radial force, the pitch paddle agitator produces an axial force, and the paddle agitator is suitable for low viscosity liquids, suspensions and solution agitation.
main feature:
●The slurry mixer is an advanced and ideal machine at home and abroad. It has high automation, good mixing quality, high efficiency, low energy consumption, low noise, convenient operation, fast discharge speed, long service life of the liner and blade. The advantages of convenient maintenance and so on.
●The slurry mixer is suitable for the mixing of plastic, dry hard, lightweight aggregate concrete and various mortars and mortars.
●The mixing rod and the stirring blade have various materials such as stainless steel, carbon steel anti-corrosion and plastic;
●Easy to disassemble and install, the minimum number of parts and simple lubrication make the cycloidal reducer deeply trusted by users.
● It can reach a certain mixing intensity within the required mixing time, meet the requirements of fast, uniform and sufficient mixing speed, and has small head loss and can adapt to the change of water quantity. It is suitable for water plants with various water quantities.
main application:
The slurry mixer is suitable for the mixing of plastic, lime slurry, dry hard, lightweight aggregate concrete and various mortars and mortars.
Note on the use of paddle mixer:
● The mixer should be placed in a flat position, and the front and rear axles should be padded with square wood to keep the tires overhead, so as not to move around when starting.
● The mixer should be equipped with secondary leakage protection. After the power is turned on before going to work, it must be carefully inspected. It can only be used after passing the empty car test. During the test run, it should be checked whether the speed of the mixing drum is suitable. Under normal circumstances, the speed of the empty vehicle (after loading) is slightly faster than 2~3 turns. If there is a large difference, the ratio of the moving wheel to the transmission wheel should be adjusted.
● The direction of rotation of the mixing bowl should be in accordance with the direction indicated by the arrow. If it is not true, the motor wiring should be corrected.
● Check whether the transmission clutch and brake are flexible and reliable, whether the wire rope is damaged, whether the track pulley is good, the surrounding is unobstructed and the lubrication of each part.
● After starting the machine, always pay attention to whether the components of the mixer are running normally. When shutting down, always check if the mixer blades are bent and the screws are knocked down or loose.
●When the concrete is agitated or it is expected to stop for more than 1h, in addition to the remaining material, the stone and water are poured into the barrel, turned on, and the mortar stuck on the barrel is washed out and completely discharged. There must be no water in the barrel to prevent the barrel and blades from rusting. At the same time, the ash accumulated outside the mixing drum should be cleaned to keep the machine clean and in good condition.
● After work and when the machine is not in use, the power should be cut off and the switch box should be locked to ensure safety.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是 *的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
進口槳式攪拌機 德國KAYSEN攪拌機
