|
| 外型尺寸 | |
| 品牌 | KAYSEN |
| 貨號 | KS561059 |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
| 是否進口 |
進口框式攪拌機 德國KAYSEN攪拌機
GERMANY KAYSEN PUMP CO .,LTD
進口框式潛水?dāng)嚢铏C可視為槳式攪拌器的變形，其結構比較堅固，攪動物料量大?？蚴綌嚢杵髋c容器壁間隙較小，有利于傳熱過程的進行，常用于傳熱、晶析操作和高粘度液體、高濃度淤漿和沉降性淤漿的攪拌。
JBK型框式攪拌器直徑較大，一般取反應器內徑的2/3～9/10，50～70r/min?？焖傩D(zhuǎn)時，攪拌器葉片所帶動的液體把靜止層從反應容器壁上帶下來；慢速旋轉時，有刮板的攪拌器能產生良好的熱傳導。
JBK型框式攪拌器一般使用于粥狀物料的攪拌，攪拌轉數以60-130r/min為宜，適用的*黏度為200～300Pa·s。
主要特點：
●攪拌機槳葉采用框式攪拌形式，其動力效率高。根據池型及攪拌工藝要求可采用單層、雙層或多層槳葉，可使攪拌介質同時產生徑向和環向流動，可在要求的混合時間內達到一定的攪拌強度，滿足混合速度快、均勻、充分等要求，且水力損失小，并可廣泛適應攪拌介質比重、濃度、酸堿度、溫度及粘度的變化，以滿足各種攪拌工況的要求。
●驅動裝置主軸通過聯軸器與攪拌軸聯接，攪拌軸間均采用法蘭聯接形式聯接，攪拌軸由雙列角接觸推力球軸承和滑動軸承支承，具有足夠的強度和剛度，并具有較高的穩定性?；瑒虞S承由油室內的潤滑脂潤滑，可確保設備長期安全可靠地運行。
●傳動環節少，機械效率高，結構緊湊，運行平穩；
●占地面積小，處理量大，能耗低。安裝、運行、維護費用低；
主要應用：
JBK型框式攪拌機可在要求的混合時間內達到一定的攪拌強度，滿足混合速度快、均勻、充分等要求，且水頭損失小，并可適應水量的變化以適用于各種水量的水廠用于給水排水處理反應過程中的各種水處理藥劑的溶解或原水與混凝劑的混合、反應及池或容器內不同比重的有機或無機液體的液相攪拌混合。
Hyperbolic mixer
Frame mixer
Paddle mixer
The JBK frame type submersible mixer can be regarded as the deformation of the paddle agitator, and its structure is relatively strong, and the amount of animal material is large. The gap between the frame stirrer and the container wall is small, which is beneficial to the heat transfer process, and is often used for heat transfer, crystallization operation and stirring of high viscosity liquid, high concentration slurry and sedimentation slurry.
The JBK frame stirrer has a large diameter, generally taking 2/3 to 9/10, 50 to 70 r/min of the inner diameter of the reactor. During rapid rotation, the liquid driven by the agitator blades brings the stationary layer away from the reaction vessel wall; when rotating slowly, the scraper stirrer produces good heat transfer.
JBK frame stirrer is generally used for the stirring of porridge materials. The stirring speed is preferably 60-130r/min, and the highest viscosity is 200-300Pa·s.
main feature:
●The mixer blade adopts the frame type stirring mode, which has high power efficiency. According to the pool type and mixing process requirements, single-layer, double-layer or multi-layer blades can be used to make the stirring medium produce radial and circumferential flow at the same time, which can reach a certain stirring intensity within the required mixing time, and meet the fast mixing speed. Uniform, sufficient and other requirements, and small hydraulic loss, and can be widely adapted to the changes in specific gravity, concentration, pH, temperature and viscosity of the stirring medium to meet the requirements of various mixing conditions.
●The main shaft of the drive unit is connected to the stirring shaft through the coupling. The mixing shafts are connected by flange connection. The stirring shaft is supported by double row angular contact thrust ball bearings and sliding bearings, which has sufficient strength and rigidity and high. Stability. The plain bearings are lubricated by grease in the oil chamber to ensure long-term safe and reliable operation.
●Less transmission links, high mechanical efficiency, compact structure and stable operation;
● Small footprint, large processing capacity and low energy consumption. Low installation, operation and maintenance costs;
main application:
JBK frame mixer can reach a certain mixing intensity within the required mixing time, meet the requirements of fast, uniform and sufficient mixing speed, and has small head loss, and can adapt to the change of water quantity for water plants with various water quantities. The dissolution of various water treatment chemicals during the water supply and drainage treatment reaction or the mixing and reaction of the raw water and the coagulant, and the liquid phase stirring of the organic or inorganic liquid of different specific gravity in the tank or the vessel.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是 *的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
進口框式攪拌機 德國KAYSEN攪拌機
