- 品牌:KAYSEN
- 貨號:KS5819569
- 價格: ¥8900/臺
- 發布日期: 2019-10-11
- 更新日期: 2024-11-21
外型尺寸 | |
品牌 | KAYSEN |
貨號 | KS5819569 |
用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
型號 | KAYSEN |
工作壓差 | 0 |
制造商 | |
壓力環境 | 常壓 |
介質溫度 | 250℃ |
驅動方式 | 電動 |
適用介質 | 水 |
是否進口 |
進口切割潛水排污泵-進口潛水排污泵-德國KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
進口切割潛水排污泵,是采用凱森泵業有限公司先進的技術研發而成水泵,此系列水泵具有帶撕裂的結構,能將污水中長纖維、袋、帶、草、布條等物質撕裂、切斷,然后順利排放,特別適合于輸送含有堅硬固體、纖維物的液體以及特別臟、粘、滑的液體。
主要特點:
●排污能力強、無堵塞,能有效通過直徑φ30~φ80毫米的固體顆粒。
●撕裂機構能夠把纖維狀物質撕裂,切斷,然后順利排放,無需在泵上加濾網。
●設計合理,配套電機功率小,節能 。
●采用*材料的機械密封,可以使泵安全連續運行8000小時以上。
●結構緊湊,移動方便,安裝簡單,無需建造泵房,減少工程造價。
●雙導軌自動安裝系統,安裝維修方便,人可不必為此而進出污水坑。
●浮球開關可根據所需的水位變化,自動控制泵的停啟,無需專人看管。
●可配備全自動保護控制箱對產品的漏電、漏水及過載等進行有效保護,提高產品的安全可靠性。
主要應用:
進口切割潛水排污泵適用于化工、石油、制藥、采礦、造紙、電廠及城市污水處理、市政工程、公共設施排污等輸送帶顆粒、纖維的污水污物。
切割潛水排污泵維護保養:
●電泵應有專人管理與使用,并定期檢查電泵繞組與機殼之間的絕緣電阻是否正常*不得低于0.5兆歐,否則必須拆下將定子烘干,絕緣電阻升高后方可使用。
● 每次使用特別是用于較稠較粘的漿液后,應放于清水中運行數分鐘再存放。
●電泵每使用300~500小時后應打開腰部油孔螺釘并用純凈10號機油補充,使用機械密封保持良好的潤滑狀態。如發現油室大量進水則表明機械密封失效,應予更換。
●電泵啟動后如發現流量不足或揚程達不到規定值(除管路阻力大或堵塞)可能是轉向反了,這時應斷開電源,將電纜的三根相線中任意二根相互對換后,量新接好再啟動便可。
●電泵拆卸、維修后,密封性能必須經0.2MPa氣密試驗檢查。
●彎頭和電泵分離放在板箱內,請將彎頭裝在電泵上,如果電果和管道連接則不必再裝彎頭。
The imported cutting submersible sewage pump is a water pump developed by the advanced technology of Germany Kaisen Pump Co., Ltd. This series of pumps has a tearing structure, which can transport long fibers, bags, belts, grass, cloth and other materials in the sewage. It is torn, cut, and then discharged smoothly. It is especially suitable for conveying liquids containing hard solids and fibrous materials as well as particularly dirty, sticky and slippery liquids.
main feature:
● Strong discharge capacity, no clogging, and effective passage of solid particles with a diameter of φ30 to φ80 mm.
● The tearing mechanism can tear the fibrous material, cut it, and then discharge it smoothly without adding a strainer to the pump.
●The design is reasonable, the supporting motor power is small, and the energy saving effect is remarkable.
●The mechanical seal of the latest material can make the pump run safely for more than 8000 hours.
●Compact structure, easy to move, simple installation, no need to build pump room, reduce engineering cost.
●Double-rail automatic installation system, easy to install and maintain, people do not have to enter and exit the sump.
●Float switch can automatically control the pump to stop according to the required water level change, without special care.
● It can be equipped with fully automatic protection control box to effectively protect the product from leakage, water leakage and overload, and improve the safety and reliability of the product.
main application:
Imported cutting submersible sewage pump is suitable for chemical, petroleum, pharmaceutical, mining, paper, power plant and urban sewage treatment, municipal engineering, public facilities sewage and other conveyor belt particles, fiber sewage.
Cutting submersible sewage pump maintenance:
●The electric pump should be managed and used by special personnel, and regularly check whether the insulation resistance between the electric pump winding and the casing is normal and the minimum is not less than 0.5 megohm. Otherwise, the stator must be removed and the insulation resistance increased. .
● After each use, especially for thicker and more viscous slurry, it should be stored in clean water for a few minutes before storage.
● After using the electric pump for 300~500 hours, the lumbar oil hole screw should be opened and replenished with pure No. 10 oil, and the mechanical seal should be used to maintain a good lubrication state. If a large amount of water is found in the oil compartment, the mechanical seal is invalid and should be replaced.
●If the flow is insufficient or the lift does not reach the specified value after the start of the electric pump (except for the pipeline resistance or blockage), the steering may be reversed. At this time, the power should be disconnected, and any two of the three phases of the cable should be opposite each other. After the change, the new quantity can be connected and then started.
● After the electric pump is disassembled and repaired, the sealing performance must be checked by the 0.2MPa airtight test.
● The elbow and the electric pump are separated in the crates. Please install the elbow on the electric pump. If the electric fruit is connected with the pipe, it is not necessary to install the elbow.
Cutting submersible sewage pump
Diving flow booster
Submersible mixed flow pump
Submersible return pump
Corrosion resistant sewage pump
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是 *的各種流體水泵和隔膜泵制造商之一。60多年來,凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合,我們支持 各地的客戶成功掌握供水,采礦,工業,化工,造紙,電力,食品,制藥,污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商,我們是液體需要安全,高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量,講信譽”為宗旨。產品現 全國各地,并已逐步開發海外市場。公司多次被評為“重合同講信用”企業,深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.