|
| 外型尺寸 | |
| 品牌 | 德國KAYSEN |
| 貨號 | |
| 用途 | 提取地下水,也可用于河流、水庫、水渠等提水工程 |
| 型號 | KAYSEN |
| 工作壓差 | |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
| 是否進口 |
進口不銹鋼深井泵(深井泵10 )
德國KAYSEN凱森進口不銹鋼深井泵概述：
進口不銹鋼深井泵的*特點是將電動機和泵制成一體，它是浸入地下水井中進行抽吸和輸送水的一種泵，被廣泛應用于農田排灌、工礦企業、城市給排水和污水處理等。由于電動機同時潛入水中，故對于電動機的結構要求比一般電動機特殊。其電動機的結構形式分為干式、半干式、充油式、濕式4種。
開泵前，吸入管和泵內必須充滿液體。開泵后，葉輪高速旋轉，其中的液體隨著葉片一起旋轉，在離心力的作用下，飛離葉輪向外射出，射出的液體在泵殼擴散室內速度逐漸變慢，壓力逐漸增加，然后從泵出口，排出管流出。此時，在葉片中心處由于液體被甩向周?chē)纬杉葲](méi)有空氣又沒有液體的真空低壓區，液池中的液體在池面大氣壓的作用下，經吸入管流入泵內，液體就是這樣連續不斷地從液池中被抽吸上來又連續不斷地從排出管流出。
基本參數：包括流量、揚程、泵轉速、配套功率、額定電流、效率、出水口管徑等等。
潛水泵組成：由控制柜，潛水電纜，揚水管，潛水電泵和潛水電機組成。
Germany Kaysen imported stainless steel deep well pump overview:
The most important feature of stainless steel deep well pump is the integration of electric motor and pump. It is a kind of pump that is immersed in groundwater well for pumping and conveying water. It is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment. Since the motor is submerged into the water at the same time, the structural requirements for the motor are special to those of the general motor. The structure of the motor is divided into dry, semi-dry, oil-filled and wet.
The suction tube and pump must be filled with liquid before the pump is turned on. After the pump is turned on, the impeller rotates at a high speed, and the liquid rotates with the blade. Under the action of the centrifugal force, it flies outward from the impeller, and the liquid that is ejected in the pump chamber diffuses slowly, the pressure gradually increases, and then the pump At the exit, the discharge pipe flows out. At this time, at the center of the blade, the liquid is drawn to the surroundings to form a vacuum low-pressure zone with neither air nor liquid. The liquid in the liquid pool flows into the pump through the suction pipe under the action of the atmospheric pressure of the pool surface, and the liquid is continuously continuous. It is continuously sucked from the liquid pool and continuously flows out from the discharge pipe.
Basic parameters: including flow, lift, pump speed, matching power, rated current, efficiency, outlet diameter and so on.
Submersible pump consists of: control cabinet, diving cable, water pipe, submersible pump and submersible motor.
Germany Kaysen imported pneumatic diaphragm pump overview
The pneumatic diaphragm pump is currently the most innovative type of pump in the industry.
The pneumatic diaphragm pump uses compressed air as the power source. For various corrosive liquids, liquid with particles, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted.
The pump body is made of four materials, aluminum alloy, cast iron, engineering plastics and stainless steel. NBR, neoprene, fluororubber, and polytetrafluoroethylene are used according to different liquid media. To meet the needs of different users.
main feature:
The pneumatic diaphragm pump does not need to be irrigated, the suction stroke is up to 5m, the product lift can reach 70 meters, the outlet pressure is ≥7kgf/cm2; the flow is spacious, the pass performance is good, and the maximum particle diameter is allowed to reach 10mm. When the mud and impurities are pumped, the pump wears little; the lift and flow can be adjusted steplessly by the valve opening (the air pressure is adjusted between 1-7kgf/cm2); the pneumatic diaphragm pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the working medium, and the delivered medium does not leak outward. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and harm to personal safety; it does not need electricity, it is safe and reliable to use in flammable and explosive places; it can be submerged in the medium;
Easy to use, reliable in operation, easy to open and close, only need to open and close the gas valve, even if there is no medium running or sudden stop due to unexpected circumstances, the pneumatic stainless steel diaphragm pump will not be damaged, and the pump will not be overloaded. Automatic stop, self-protection performance, when the load returns to normal, there is automatic start-up operation; simple structure, less wearing parts, the pneumatic stainless steel diaphragm pump is simple in structure, easy to install and maintain, the medium conveyed by the pump will not be in contact Valves, linkages and other moving parts, unlike other types of pumps, the performance of the rotor, pistons, gears, blades and other components wear down gradually; can transport a more viscous liquid (viscosity below 10,000 centipoise); The pump does not need to be lubricated with oil, even if it is idling, it has no effect on the pneumatic stainless steel diaphragm pump.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
進口不銹鋼深井泵(進口深井泵 品牌)
