|
| 品牌 | 德國KAYSEN |
| 連接形式 | 螺紋 |
| 材質 | 鑄鐵、不銹鋼、鋁合金、氟墮料 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 適用范圍 | 水、污水、石油、化工、電子、飲料、食品 |
| 壓力環境 | 常壓 |
| 介質溫度 | 1200℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
包裝：原裝木箱
品牌：凱森
型號：KAYSEN
產品名稱：塑料泵
塑料泵（原裝廠家）
塑料泵是凱森在離心泵的基礎上，采用磁力耦合實現力矩的無接觸傳遞,是無軸封、全密封、無泄漏、耐腐蝕、無污染的新型環保型臥式離心泵。
塑料泵的選材
工程塑料是指被用做工業零件或外殼材料的工業用塑料，是強度、耐沖擊性、耐熱性、硬度及抗老化性均優的塑料。工程塑料泵是指用這些材料制作的，有特殊的物理、化學性能，可以滿足不同工業要求的產品。
常用的材料
1． 熱性質：玻璃轉移溫度（Tg）及熔點（Tm）；熱變形溫度（HDT）高；長期使用溫度高（UL-746B）；使用溫度范圍大；熱膨脹系數小。
2． 機械性質：高強度、高機械模數、低潛變性、強耐磨損及耐疲勞性。
3． 其它：耐化學藥品性、抗電性、耐燃性、耐候性、尺寸安定性佳。
工程塑料的結構
被當做通用性工程塑料者包括聚碳酸酯（PC）、聚酰胺（尼龍）、聚縮醛（POM）、變性聚苯醚（變性PPE）、聚酯（PETP，PBTP）、聚苯硫醚（PPS）、聚芳基酯，熱硬化性塑料則有不飽和聚酯、酚塑料、環氧塑料等。
它們的基本特性為拉伸強度均超過50Mpa,抗拉強度在500kg/cm ,耐沖擊性超過50J/m，彎曲彈性率在24000kg/cm ，負載繞曲溫度超過100℃，硬度、老化性優。聚丙烯若改善其硬度和耐寒性，也可列入工程塑料的范圍。此外，還包括較特殊者的強度弱、耐熱耐藥品性優的氟素塑料，耐熱性優的硅溶融化合物，以及聚酰胺酰亞胺、聚酰亞胺、Polybismaleimide、Polysufone(PSF)、PES、丙烯塑料、變性蜜胺塑料、BTResin、PEEK、PEI、液晶塑料等。
各工程塑料的化學構造不同，所以制成的工程塑料泵的耐藥品性、摩擦特性、電機特性等有所差異。由于各工程塑料的成型性不同，這樣就造成了工程塑料泵應用上的局限。熱硬化型工程塑料的制造的工程塑料泵耐沖擊性較差，因此大多添加玻璃纖維。工程塑料除了聚碳酸酯等耐沖擊性大外，通常具有硬、脆、延伸率小的性質，但如果添加20—30%的玻璃纖維，則它制成的工程塑料泵耐沖擊性將有所改善。The plastic pump is a German based Kaysen on the basis of the centrifugal pump, uses the magnetic coupling to realize the non-contact transmission of the torque, and is a new environment-friendly horizontal centrifugal pump with no shaft seal, full sealing, no leakage, corrosion resistance and no pollution. Plastic pump selection Engineering plastics are industrial plastics that are used as industrial parts or housing materials. They are plastics that are excellent in strength, impact resistance, heat resistance, hardness, and aging resistance. Engineering plastic pumps are made of these materials, have special physical and chemical properties, and can meet the requirements of different industrial products. Commonly used materials 1. Thermal properties: glass transition temperature (Tg) and melting point (Tm); high heat distortion temperature (HDT); high long-term use temperature (UL-746B); large operating temperature range; 2. Mechanical properties: high strength, high mechanical modulus, low latent denaturation, strong wear resistance and fatigue resistance. 3. Others: Good chemical resistance, electrical resistance, flame resistance, weather resistance, dimensional stability. Structure of engineering plastics Polyurethanes (PC), polyamide (nylon), polyacetal (POM), denatured polyphenylene ether (denatured PPE), polyester (PETP, PBTP), polyphenylene sulfide PPS), polyarylate, thermosetting plastics are unsaturated polyester, phenolic plastics, epoxy plastics, etc. Their basic characteristics are that the tensile strength exceeds 50Mpa, the tensile strength is 500kg/cm, the impact resistance exceeds 50J/m, the bending elasticity is 24000kg/cm, the load bending temperature exceeds 100°C, and the hardness and aging properties are excellent. If polypropylene can improve its hardness and cold resistance, it can also be included in the scope of engineering plastics. In addition, it also includes weaker, more heat-resistant and chemically-resistant fluoroplastics, more heat-resistant silicon-melting compounds, and polyamideimide, polyimide, polybismaleimide, and Polysufone (PSF). , PES, acrylic, denatured melamine plastics, BTRinsin, PEEK, PEI, liquid crystal plastics, etc. The chemical structure of each engineering plastic is different. Therefore, the chemical resistance, friction characteristics, and motor characteristics of the manufactured plastic pump vary. Due to the different formability of engineering plastics, this has caused limitations in the application of engineering plastics pumps. Since the engineering plastic pumps for the manufacture of thermosetting engineering plastics have poor impact resistance, glass fibers are often added. In addition to high impact resistance of polycarbonate and other engineering plastics, it is generally hard, brittle, and has low elongation. However, if 20-30% of glass fiber is added, the impact resistance of engineering plastic pumps made of it will be improved. improve.
塑料泵（原裝廠家）
凱森塑料泵以下 特征 法蘭等形式，滿足各種管道要求。
凱森塑料泵主要用于農田灌溉及高原山區的人畜用水，亦可供城市、工廠、鐵路、礦山、工地供排水使用。
凱森塑料泵材質：鑄鐵、不銹鋼、雙相鋼。
凱森泵業有限公司總代理：營派閥門（上海）有限公司
如果您有需要咨詢更詳細產品價格、型號、產品的尺寸和技術資料
請咨詢總代理商經理--呂先生
